Spray foam removal in Wellington done right, first time

Serving Wellington, Shropshire from our Telford base since 2022

Spray foam removal in Wellington is what our team does every week, from Victorian terraces around Wellington Market to rural fringe properties near The Wrekin. We remove open cell and closed cell foam from lofts, roofs and cavity walls, then leave your timbers clean and mortgage-ready. Whether you need same day spray foam removal or a booked survey, we cover Wellington Town Centre, Dothill, Leegomery, Hadley and Apley with upfront pricing and no mess left behind.

Get a free quote Call 0195 230 1076

Years serving Wellington

Wellington jobs completed

300+

Emergency callout cover

24/7

A worker in protective gear painting walls during an indoor renovation project.

Spray foam removal in Wellington by local specialists

AeroSpace Spray Foam Team has worked across Wellington since 2022, removing spray foam insulation from the lofts, roofs and cavity walls of the town's older housing stock. Wellington is a historic market town where Victorian terraces and 1930s semis sit alongside rural fringe properties, and much of that stock was never designed for the airtight seal that polyurethane foam creates. We use thermal imaging cameras to map where foam has spread, an oscillating multi-tool and spray foam removal saw to cut it back, and an industrial vacuum to clear every last crumb. Our technicians wear full respirator and protective clothing because isocyanate and polyol dust is not something you want loose in a family home. If you are searching for spray foam removal near Wellington, we cover TF1 1, TF1 2, TF1 3 and TF1 5 postcodes as standard. We are one of the few spray foam removal companies in the area that handles both open cell and closed cell foam, and we work directly with mortgage lenders who have flagged foam as a valuation problem.

Wellington has a high concentration of pre-1950 homes with loft conversion potential, and that is exactly where spray foam causes trouble. Foam traps moisture against roof timbers, and in a town that gets the wet, westerly weather rolling in off the Shropshire hills, trapped moisture means rot. We also see a steady stream of homeowners who have had a mortgage refused due to spray foam and need it out quickly to keep a sale alive. Because we are based in Telford, we can be in Wellington Town Centre or Dothill within the hour for urgent jobs, and we know the access quirks of the older terraces near Wellington railway station.

Spray foam removal services available in Wellington

Demand for spray foam removal in Wellington Shropshire has climbed sharply as lenders tighten rules on foam-insulated roofs. Most of our Wellington work is loft and roof foam removal on Victorian terraces and 1970s estates, plus cavity wall foam in the newer Leegomery and Dothill housing. We handle residential and commercial jobs, from a single loft to a full warehouse roof, and we can usually get a survey booked within 48 hours.

Spray Foam Removal near me

If you are searching for spray foam removal near me in Wellington, we cover every TF1 postcode from Wellington Town Centre out to Apley. Our van carries a thermal imaging camera, oscillating multi-tool and industrial vacuum, so we can survey and start removal in the same visit. Most loft jobs take four to six hours.

Spray Foam Removal near me

same day Spray Foam Removal

Same day spray foam removal in Wellington is available when you call before 10am. We prioritise urgent cases such as a collapsed sale or a lender deadline, and we can be at properties in Hadley, Leegomery or Dothill within a few hours. You get a fixed price before we start cutting.

same day Spray Foam Removal

24/7 Spray Foam Removal

Our 24/7 spray foam removal line covers Wellington for emergencies such as water pouring through a foam-blocked roof or a commercial unit that cannot wait until morning. Call 0195 230 1076 any hour and we will arrange a callout. Overnight work is common on warehouse and retail units near the town centre.

24/7 Spray Foam Removal

Residential Spray Foam Removal

Residential spray foam removal across Wellington covers lofts, attic spaces, roof slopes and cavity walls. We work carefully in occupied homes, laying dust sheets and sealing the loft hatch with a zip door. Victorian terraces near Wellington Market and 1930s semis in Apley are our most common residential jobs.

Residential Spray Foam Removal

Commercial Spray Foam Removal

Commercial spray foam removal in Wellington serves shops, offices and light industrial units around the town centre and Telford College. We schedule evening and weekend shifts so your business keeps trading. Larger roofs are cleared with dry ice blasting and industrial vacuum extraction, then we document the removal for your insurer or landlord.

Commercial Spray Foam Removal

loft spray foam removal

Loft spray foam removal is our most requested Wellington service. Foam sprayed between rafters blocks the airflow that older Shropshire roofs rely on, and condensation follows. We cut the foam back to the timber, clear the debris and restore ventilation paths. Most Wellington lofts are cleared in a single day.

loft spray foam removal

roof spray foam removal

Roof spray foam removal in Wellington tackles foam applied directly to the underside of roof tiles or slates. This is common on rural fringe properties near The Wrekin where homeowners were sold foam as a draught fix. We remove it without damaging the roof covering, then treat any timber rot we uncover.

roof spray foam removal

Attic spray foam removal

Attic spray foam removal in Wellington suits older properties where the attic was converted or used for storage. Closed cell foam in an attic traps heat and moisture against the rafters. We remove it, inspect the timbers with a thermal imaging camera, and leave the space ready for breathable insulation.

Attic spray foam removal

spray foam insulation removal

Spray foam insulation removal in Wellington is what we do when foam has to come out for a mortgage, a sale or a failed survey. We remove open cell and closed cell foam, bag it, and provide written confirmation of removal that your lender will accept. Most Wellington jobs are completed within one to two days.

spray foam insulation removal

open cell spray foam removal

Open cell spray foam removal in Wellington is the softer, spongier foam often found in lofts around Dothill and Leegomery. It soaks up moisture like a sponge, so we remove it with scrapers and an industrial vacuum rather than cutting tools. The timber underneath usually dries out well once airflow returns.

open cell spray foam removal

closed cell spray foam removal

Closed cell spray foam removal in Wellington is the harder job. This foam sets like rock and is often found on roof slopes in Hadley and Apley. We use a spray foam removal saw, oscillating multi-tool and chisel to take it back without gouging the rafters, then sand the residue clean.

closed cell spray foam removal

mortgage lender spray foam removal

Mortgage lender spray foam removal in Wellington is for homeowners whose sale has stalled because a surveyor flagged foam. We remove the foam, photograph the cleared timbers and issue a removal certificate your lender can file. We have helped buyers and sellers across TF1 1 and TF1 2 keep their chains together.

mortgage lender spray foam removal

insulation removal service

Our insulation removal service in Wellington covers foam, old mineral wool and contaminated loft insulation in one visit. If foam has been sprayed over existing insulation, we strip both and dispose of everything under our waste carrier licence. One clear price covers removal, disposal and a clean loft.

insulation removal service

insulation assessment

An insulation assessment in Wellington tells you exactly what foam you have, where it has spread and whether it is affecting your mortgage or your roof timbers. We use a thermal imaging camera and a moisture meter, then give you a written report with photos. Assessments start from a fixed callout fee.

insulation assessment

dry ice blasting spray foam removal

Dry ice blasting spray foam removal is our cleanest method for Wellington jobs where dust must be kept to a minimum, such as occupied homes or food units. Dry ice pellets freeze the foam residue and lift it off the timber without chemicals or water. It is ideal for delicate roof structures.

dry ice blasting spray foam removal

Cavity wall spray foam removal

Cavity wall spray foam removal in Wellington addresses foam injected into wall cavities, common on 1970s and 1980s homes in Leegomery and Dothill. Foam in a cavity traps damp and can bridge the damp-proof course. We extract it through drilled access points and restore the cavity.

Cavity wall spray foam removal

sand blasting spray foam insulation removal

Sand blasting spray foam insulation removal is used on Wellington commercial roofs and brickwork where foam has bonded hard to masonry. Sand blasting media strips the residue back to a clean surface ready for a breathable coating. We screen the work area and control dust throughout.

sand blasting spray foam insulation removal

thermal spray foam removal

Thermal spray foam removal uses heat to soften cured foam before we scrape it away, which suits Wellington roof timbers that are too fragile for saw cutting. It is slower but far gentler on old Shropshire oak and softwood rafters. We use it where timber condition is borderline.

thermal spray foam removal

environmentally friendly insulation removal

Environmentally friendly insulation removal in Wellington means we separate foam, timber debris and old wool for recycling wherever possible. Foam waste goes to licensed disposal, and we avoid chemical strippers in favour of dry ice and mechanical methods. You get a clean loft and a clear waste transfer note.

environmentally friendly insulation removal

Warehouse spray Foam removal

Warehouse spray foam removal in Wellington covers large industrial roofs on the town's commercial estates. We work in sections so your operation keeps running, using dry ice blasting and industrial vacuums on scissor lifts. Most warehouse roofs are cleared over two to four night shifts.

Warehouse spray Foam removal

A person in protective suit disinfecting a room to eliminate viruses and bacteria.

Local Expertise

How we execute spray foam removal in Wellington

Every Wellington job starts with a survey. We check the foam type, measure the affected area and look at the roof structure before we quote. On the day, we lay protection, set up negative-pressure dust control and cut the foam back to clean timber. Closed cell foam is cut with a spray foam removal saw and oscillating multi-tool; open cell foam is scraped and vacuumed. We finish with a thermal imaging camera pass to confirm no foam bridges remain and no damp pockets are left behind. Access in Wellington matters. Terraces near Wellington Market often have rear alley access only, so we carry kit through on trolleys rather than blocking the street. Rural fringe properties out towards The Wrekin can need a longer hose run from the van. If you need spray foam removal near me Wellington quickly, tell us the postcode and we will confirm the earliest slot. Typical 2026 pricing for a standard Wellington loft sits between 1,200 and 2,800 pounds depending on foam type and area.

Victorian terraces with rear alley access only

We survey access before quoting and bring modular kit that breaks down to fit through standard alley gates. Waste is bagged in smaller loads and carried out in stages, so we never block a neighbour's passage or leave bags overnight.

Roof timbers already softened by trapped moisture

We probe timbers with a moisture meter first and switch to thermal spray foam removal or hand tools where the wood is soft. Anything unsound is identified in the survey so you know before we start whether a joiner needs to follow us.

Conservation areas restricting external modifications

We plan internal ventilation routes that stay within the roof space, using breathable membrane and hidden vents where allowed. Where consent is needed, we document the foam removal and the proposed ventilation so your conservation officer can review it.

Service Areas

Wellington neighbourhoods we cover

We work right across Wellington, from the terraces around the market to the estates on the town's edge. Postcodes TF1 1, TF1 2, TF1 3 and TF1 5 are all standard coverage, and we can usually be on site within the hour for urgent jobs. Here is what we see in each area.

Wellington Town Centre

Dothill

Leegomery

Hadley

Areas Served

Find Us in Wellington

We started in 2022 and Wellington was one of our first regular patches. The early work came from homeowners around Apley and Hadley who had foam installed under a government-backed scheme and later found it was blocking their loft ventilation. Word spread through the town, and we now run a steady schedule of removals across Wellington every month. Four years in, we have built relationships with local surveyors and estate agents who refer us when a foam-affected property hits the market. That local trust is why so many people searching for the best spray foam removal Wellington has available end up calling us.

Get directions

Recent spray foam removal jobs in Wellington

These are real jobs from the last few months across Wellington. They show the range of foam problems we see and what removal actually involves. Names and exact addresses are left out, but the locations and outcomes are accurate.

A nurse wearing gloves shows a can of medical adhesive remover in a clinical setting.

Challenge

A Victorian terrace near Wellington Market had closed cell foam sprayed between rafters during a loft conversion, and the buyer's mortgage lender refused to proceed until it was removed.

Solution

We surveyed the loft, confirmed the foam type with a thermal imaging camera, and removed it over two days using a spray foam removal saw and oscillating multi-tool. Timbers were cleaned back to bare wood and treated where moisture had taken hold.

Impact

The loft was cleared and photographed, and our removal certificate went straight to the lender. The sale completed three weeks later.

Wellington Town Centre

Challenge

A 1970s semi in Dothill had cavity wall foam injected years ago, and the homeowner noticed damp patches on the inner walls each winter.

Solution

We drilled access points along the affected wall, extracted the foam with an industrial vacuum, and cleared the cavity so it could drain and ventilate again. The wall was made good and the cavity left clear.

Impact

The damp patches stopped within one heating season, and the homeowner avoided a much larger damp-proofing bill.

Dothill

Challenge

A detached house on the rural fringe towards The Wrekin had open cell foam in the loft that had sagged and was holding moisture against the roof timbers.

Solution

We removed the foam with scrapers and an industrial vacuum, then ran a thermal imaging camera pass to confirm no damp pockets remained. Breathable insulation was fitted to replace it.

Impact

Timber moisture readings dropped from 24 percent to 14 percent over eight weeks, and the roof void now ventilates properly.

Apley

When To Call

Signs you need spray foam removal in Wellington

Foam does not always announce itself. Most Wellington homeowners only find out there is a problem when a surveyor, lender or buyer raises it. These are the signs we see most often, and if any of them sound familiar, it is worth booking an assessment before the problem gets worse.

1. Condensation dripping from loft rafters

Foam blocks the airflow that a roof needs, so moisture condenses on cold timbers and drips. In Wellington's wet climate this shows up fast. Left alone, it soaks the wood and starts rot. This is the single most common sign we find.

2. Mortgage or surveyor flagging the foam

Lenders increasingly refuse mortgages on foam-insulated roofs. If your buyer's surveyor has raised it, you usually have a deadline attached. We can survey quickly and give you a removal date that fits the chain.

3. Musty smell in the loft or upstairs rooms

A damp, earthy smell coming from the loft hatch usually means trapped moisture and early timber decay. It gets stronger in winter. By the time you can smell it, the foam has often been holding water for a season or more.

4. Foam pulling away from rafters

Open cell foam shrinks and sags as it ages, leaving gaps where moisture collects. You may see it hanging loose or crumbling at the edges. Once it detaches it stops insulating and starts trapping damp instead.

5. Rising energy bills despite the insulation

Foam that has shrunk or become damp loses its insulating value, so the loft feels cold and your heating works harder. If bills are climbing and the loft is foam-filled, the foam is likely doing more harm than good.

Local Problem Patterns

Common spray foam problems in Wellington

Wellington's housing stock and weather combine to create a specific set of foam problems. Older roofs were built to breathe, and foam stops them doing it. Add the wet westerly weather coming off the Shropshire hills and you get condensation, rot and failed surveys. These are the four issues we deal with most in the TF1 postcodes.

Loft condensation caused by blocked ventilation

Why it happens here

Victorian and Edwardian roofs in Wellington rely on airflow through eaves and gaps between tiles. Foam sprayed between rafters seals those paths, so warm moist air from the house condenses on cold timbers. The town's damp climate makes it worse.

Our approach

We remove the foam, clear the ventilation paths and check the eaves are open. Where ventilation cannot be restored externally, we plan an internal route. A thermal imaging camera pass confirms the roof is drying out.

Mortgage refusal due to spray foam

Why it happens here

Lenders treat foam-insulated roofs as high risk because they cannot easily inspect the timbers underneath. In Wellington, where older properties change hands regularly, this stalls sales at the worst moment.

Our approach

We survey, remove the foam and photograph the cleared timbers. You get a removal certificate your lender can file. We work to the buyer's deadline and can usually fit urgent Wellington jobs within days.

Roof timber rot hidden under foam

Why it happens here

Foam holds moisture against rafters for years without anyone noticing. By the time a surveyor spots soft timber, decay has often spread along the roof slope. Rural fringe properties near The Wrekin are most exposed.

Our approach

We probe timbers with a moisture meter during the survey and flag any soft sections before work starts. Removal is done with hand tools or thermal methods where the wood is fragile, so we do not make the damage worse.

Cavity wall damp from injected foam

Why it happens here

Foam injected into a cavity can bridge the damp-proof course and stop the wall draining. In Dothill and Leegomery, where this was common in the 1980s and 1990s, homeowners see damp patches on inner walls each winter.

Our approach

We drill access points, extract the foam with an industrial vacuum and leave the cavity clear so it can drain again. The wall is made good afterwards, and we check the damp-proof course is not bridged.

Year-Round Coverage

How the seasons affect spray foam removal in Wellington

Foam problems in Wellington follow the weather. Autumn and winter are when condensation and damp show up, spring is when buyers start viewing and surveys get done, and summer is the best time to have the work carried out. Here is what to expect through the year.

Spring

Spring is survey season in Wellington. Buyers are viewing, lenders are instructing valuations, and foam flags start appearing in reports. Lofts that stayed damp all winter are now visible as stained timbers and musty smells.

Tip

If you are selling, book an assessment before your buyer's surveyor does. Getting the foam out early keeps the chain moving and avoids a last-minute panic.

Summer

Summer is the easiest time to remove foam. Timbers dry quickly, lofts are safe to work in, and we can leave roof spaces open to ventilate without rain getting in. It is also when we schedule most commercial and warehouse jobs.

Tip

Book summer removals early. This is our busiest period for Wellington lofts, and same week slots disappear quickly from June onwards.

Fall

As the weather turns wet and westerly, condensation returns to foam-filled lofts across Wellington. Damp patches reappear on cavity walls in Dothill and Leegomery, and musty smells come back. Demand for emergency callouts rises.

Tip

Check your loft hatch for damp or smell before the heating goes on full time. Catching it in autumn usually means a smaller, cheaper removal job.

Winter

Winter is when foam problems become urgent. Water can drip from rafters, timbers stay wet for weeks, and heating bills climb because damp foam insulates poorly. Emergency and 24/7 callouts peak between December and February.

Tip

If you see dripping or staining in the loft, call us rather than waiting for spring. Every extra wet month increases the chance of rot spreading along the rafters.

Hiring Smart

Questions to ask before hiring a spray foam removal company

Not every contractor who offers foam removal in Wellington does it properly. Some will scrape the surface and leave residue that still fails a survey. Others will not touch closed cell foam at all. These are the questions worth asking before you hand over a deposit.

1

"Do you remove both open cell and closed cell foam?"

Why it matters

Closed cell foam is far harder to remove and needs different tools. A contractor who only handles open cell may turn up and then tell you the job is not possible, or do a poor job on the hard foam and leave residue behind.
2

"Will I get a written removal certificate for my lender?"

Why it matters

Most Wellington removals are driven by a mortgage or sale. A certificate with dated photographs of the cleared timbers is what lenders want to see. If a contractor cannot provide one, your sale may still stall after the work is done.
3

"How do you check the timbers underneath?"

Why it matters

Foam hides rot. A proper contractor probes the timbers with a moisture meter during the survey and tells you before work starts whether a joiner will be needed. Anyone who skips this step is guessing.
4

"What dust and fume controls do you use?"

Why it matters

Foam dust contains isocyanate and polyol residues. We use negative-pressure dust control, respirators and protective clothing. If a contractor turns up without proper extraction and masks, walk away.
5

"Is the price fixed after the survey?"

Why it matters

A survey-based fixed price protects you from mid-job surprises. If a contractor quotes over the phone without seeing the foam, expect the number to change once they are on site and you are committed.

Knowing the Area

Navigating Wellington and the surrounding area

Wellington is compact enough that we can move between jobs quickly, but the landmarks help us plan routes and access. We use Wellington Market as our town centre reference point, Telford College for the northern commercial cluster, and The Wrekin for the rural fringe properties where foam problems are often worst. If you are giving us directions, a landmark is usually faster than a postcode in the older streets.

Landmarks

Wellington Market

The market sits at the centre of the town's oldest streets, where terraces have restricted access and no off-street parking. We plan town centre jobs around market days so our van is not blocking loading bays.
Telford College

The college anchors the northern commercial area, and we handle foam removal on nearby offices and light industrial units. Evening and weekend shifts keep disruption away from college traffic.
The Wrekin

Properties on the rural fringe towards The Wrekin are exposed to driving rain and wind, which is where foam-insulated roofs fail fastest. These jobs often need a longer hose run and a full roof survey.

Commercial Districts

Wellington town centre retail parade

Shops and offices above retail units frequently have foam in the roof void. Removal usually happens overnight so trading is not affected, and we document the work for landlords and insurers.
Telford College business cluster

Light industrial and office units around the college need roof foam removal when leases change hands or insurers request it. We work in sections to keep each unit operational.

Transport & Access

Wellington railway station

The station sits close to the town centre, so jobs near it need careful parking. We use the station approach for drop-offs and carry kit the last stretch on foot.
A5 and M54 corridor

The A5 and M54 give us fast access to Wellington from Telford and out towards Shrewsbury. It is how we reach rural fringe properties quickly for emergency callouts.

Nearby towns we cover from Wellington

Wellington sits at the western edge of Telford, and we cover the whole surrounding area from the same base. If you are just outside Wellington, we almost certainly cover you. Here is how the nearby towns relate to our Wellington work.

Telford Town Centre

Our home base is in Telford, so town centre jobs are often same day. Many Wellington customers come to us through Telford referrals.

Madeley

Madeley is a short run south east of Wellington, and we cover its older terraces and 1970s estates with the same kit and crew.

Dawley

Dawley sits between Wellington and Telford, and we regularly pair Dawley jobs with Wellington ones to keep travel time down.

Oakengates

Oakengates is a few minutes east of Wellington, with similar Victorian terraces and the same loft foam problems.

Stirchley

Stirchley's newer housing often has cavity wall foam, which we remove using the same extraction method we use in Dothill.

Donnington

Donnington is a short drive from Wellington and shares its mix of older and post-war housing, so the foam issues are familiar.

Spray foam removal in Wellington: your questions answered

How much does spray foam removal cost in Wellington?

Typical 2026 prices in Wellington range from about 1,200 pounds for a small open cell loft to 2,800 pounds or more for a large closed cell roof. Cavity wall extraction usually runs 900 to 1,800 pounds. The final figure depends on foam type, area and timber condition, so we quote from a survey rather than over the phone.

Who is the best spray foam removal company in Wellington?

Look for a company that removes both open cell and closed cell foam, provides a written removal certificate for lenders, and surveys the timbers before quoting. We have worked across Wellington since 2022 and handle mortgage-driven removals every week. Ask any contractor for their method, their dust controls and a fixed survey-based price.

Do you offer emergency spray foam removal in Wellington?

Yes. Our 24/7 spray foam removal line covers Wellington every day of the year, including bank holidays. Call 0195 230 1076 and we will arrange a callout. Emergencies usually involve water coming through a foam-blocked roof or a commercial unit that cannot wait until morning.

Is spray foam removal near Wellington available same day?

Same day spray foam removal is available across Wellington if you call before 10am and we have a crew free. We prioritise urgent cases such as a collapsed sale or a lender deadline. Postcodes TF1 1, TF1 2, TF1 3 and TF1 5 are all within our standard same day area.

Will removing spray foam affect my mortgage application?

Removing the foam usually helps. Lenders object to foam because it hides the roof timbers, not because of the removal itself. Once the foam is out and we provide a dated removal certificate with photographs, most lenders will proceed. We work directly with buyers and sellers across Wellington to keep chains together.

Verified & Licensed

Trust & Safety

Licences, certifications and local compliance

We maintain the highest standards of professionalism and compliance to serve Wellington residents.

Licenses

Waste carrier licence for controlled waste disposal

Local authority approved contractor for insulation removal

Certifications

CHAS accreditation NVQ in insulation removal

Related services and areas

Browse other city pages in this generated website.

Telford Town Centre Madeley Dawley Oakengates Stirchley Donnington Hadley Leegomery Muxton Shawbirch Ketley Malinslee Woodside Brookside Aqueduct Hollinswood Randlay Sutton Hill Lightmoor

Book spray foam removal in Wellington today

We have been removing spray foam across Wellington since 2022, and every job comes with a fixed survey-based price and a removal certificate for your lender. Whether you need a loft cleared before a sale or an emergency callout in Dothill, our team can help. Call 0195 230 1076 or send us a message and we will book your survey, usually within 48 hours.

Get a free quote