Attic spray foam removal in Telford done properly, start to finish
Specialist spray foam extraction for Telford homes, lofts and mortgage surveys
Attic spray foam removal in Telford is what we do every week, from Victorian terraces in Wellington to 1970s semis in Dawley. If spray foam insulation is blocking your mortgage, trapping damp in the loft or leaving your roof timbers at risk, our team removes it cleanly, disposes of it legally and leaves your attic ready for proper insulation. We cover all of Shropshire.
What Attic spray foam removal in Telford actually involves
Attic spray foam removal in Telford is the controlled extraction of polyurethane foam from the underside of your roof deck and between rafters, followed by cleaning, timber inspection and disposal. Spray foam insulation was sold heavily across Shropshire from the 1990s onwards as a quick fix for cold lofts, but closed cell foam and open cell foam both bond hard to timber and tile. Removing it means cutting it back with a spray foam removal saw and oscillating multi-tool, then clearing residue with an industrial vacuum and dry ice blasting machine so the roof can breathe again.
Most Telford homeowners call us after a mortgage lender flags spray foam on a survey, or after they notice loft condensation, a musty smell or rising energy bills. Spray foam shrinkage leaves gaps that let warm air escape, and trapped moisture can start roof timber rot within a few seasons. We also handle attic insulation removal Telford Shropshire wide for landlords, buyers and sellers who need a clean report before completion. If you have been searching for attic insulation removal Telford near me, we are based locally and can usually survey within days.
Why Telford homeowners remove spray foam
Spray foam removal is rarely about comfort alone. In Telford it is usually about a mortgage, a damp loft or a roof that needs to last another 30 years. Here is what proper removal gives you.
Unblocks your mortgage
Most high street lenders refuse to lend on a property with spray foam on the roof deck. We provide a clear removal report and photographs so your lender, valuer or solicitor can see the timbers are clean, breathable and ready for a standard insulation product such as Thermafleece or Rockwool.
Stops loft condensation
Closed cell foam seals the roof deck and traps moisture that would otherwise vent away. After extraction we clear every cavity and check airflow, which typically drops loft humidity back to normal within two to three weeks and removes the damp, musty smell that spreads into upstairs rooms.
Protects roof timbers
Trapped moisture rots rafters and battens from the inside. We inspect every timber with a thermal imaging camera and moisture meter during removal, treat early surface mould and flag any rot before it reaches the structural stage, which is far cheaper to fix at this point.
Cuts your energy bills
Foam that has shrunk away from the rafters leaves cold bridges and draughts. Once it is out we can fit a modern breathable loft insulation to current standards, which usually brings a Telford loft back to a U-value of 0.16 W/m2K or better and takes real pressure off your heating bills.
Our spray foam removal process, step by step
Every job follows the same five stages, whether it is a single loft in Oakengates or a full roof in Hadley. You get a fixed price after the survey, and we tell you exactly how long we will be in your home.
Free loft survey
We visit your Telford property, measure the foam coverage, identify whether it is open cell or closed cell and check the timbers for moisture and rot. You get photographs, a written method statement and a fixed price, usually within 24 hours of the visit.
Loft protection
On day one we lay dust sheets, seal the loft hatch and set up negative air pressure with an industrial vacuum so no foam dust enters your living space. Our technicians wear full respirator and protective clothing throughout, and we isolate the loft from the rest of the house.
Foam extraction
We cut the foam back with a spray foam removal saw and oscillating multi-tool, working rafter by rafter. Stubborn residue is cleared with dry ice blasting or sand blasting equipment depending on the substrate, which lifts foam off brick, mortar and timber without gouging the surface underneath.
Cleaning and inspection
Once the foam is gone we vacuum every surface, check rafter moisture with a thermal imaging camera and treat any early mould. You receive a photo record of every bay, which is the document lenders and valuers ask for when they review the property.
Re-insulation and handover
We fit breathable loft insulation to current building standards, restore the loft hatch and walk you through the finished job. Most lofts are back in use the same day, and we leave the space cleaner than we found it.
Spray foam removal specialists in Telford
AeroSpace Spray Foam Team has been removing spray foam across Telford and Shropshire since 2022. In that time we have worked on hundreds of lofts, from 1930s semis in Stirchley to modern timber-frame homes in Lightmoor. Our technicians hold NVQ in insulation removal and CITB certification, and we work to CHAS, Constructionline and SafeContractor standards on every site. We know exactly how BASF, Dow and Huntsman foams behave after 20 years in a Shropshire loft, and we price the job honestly after seeing it, not over the phone.
- NVQ in insulation removal and CITB certification held by every lead technician on site.
- CHAS, Constructionline and SafeContractor accredited, with full public liability cover.
- Hundreds of Telford lofts cleared since 2022, including mortgage-driven removals.
- Thermal imaging camera and moisture meter used on every survey, not just visual checks.
- Experienced with BASF, Dow, Huntsman and Soudal foam systems found locally.
Why choose our Attic spray foam removal in Telford
We are a local team, not a national call centre. You speak to the people who will actually be in your loft, and we price the work after seeing it. Here is what sets our attic spray foam removal in Telford apart.
Local, fast response
We are based in Telford, so surveys are usually booked within 48 hours and most removals start within one to two weeks. If your mortgage deadline is tight, tell us and we will prioritise the job, including evening and weekend slots where needed.
Clean, controlled removal
We use negative air pressure, sealed hatches and industrial vacuums on every job. Homeowners regularly tell us they expected chaos and got a tidy loft instead. All foam waste is bagged, labelled and disposed of through licensed waste carriers.
Mortgage-ready paperwork
Lenders want proof, not promises. Every attic insulation removal Telford Shropshire job ends with a dated photo record, a removal certificate and a summary of the timber condition, which is exactly what valuers and solicitors ask to see before releasing funds.
Honest pricing, no surprises
You get a fixed price after the survey, covering labour, extraction, disposal and re-insulation. We do not add day rates or hidden extras. If the foam turns out to be thinner than expected, we reduce the price rather than pocket the difference.
What our Attic spray foam removal includes
Every job is quoted after a survey, so you know exactly what is covered. The list below is standard on all Telford removals. Re-insulation, roof repairs and cavity wall work are quoted separately if you need them.
Full loft survey and report
We inspect the foam, measure coverage, check timber moisture with a thermal imaging camera and give you a written report with photographs. You see exactly what is in your loft before you commit to anything.
Controlled foam extraction
We cut and lift all spray foam from rafters and the roof deck using spray foam removal saws, oscillating multi-tools and dry ice blasting or sand blasting equipment where needed. Every bay is cleared and inspected.
Dust containment and clean-up
Loft hatches are sealed, negative air pressure is set up and an industrial vacuum runs throughout. We bag all waste, wipe down surfaces and leave the loft clean enough to walk through in normal clothes.
Licensed waste disposal
All foam waste is bagged, labelled and removed by licensed waste carriers. You receive waste transfer documentation, which matters if your lender or solicitor asks for proof of responsible disposal.
Mortgage-ready documentation
You get a dated photo record of every bay, a removal certificate and a summary of timber condition. This is the pack most UK lenders and valuers ask for before they release funds on a property.
Optional breathable re-insulation
If you want the loft brought back to current standards, we fit breathable insulation such as Thermafleece or Rockwool to a U-value of 0.16 W/m2K or better. This is quoted separately and can usually be done on the same visit.
Problems our Attic spray foam removal solves
Spray foam causes a predictable set of problems in Telford lofts. Here are the ones we see most often, and how we fix them. If any of these sound familiar, a survey will tell you exactly what is going on.
Mortgage refused because of spray foam
Your sale or purchase stalls, and the lender may refuse the property entirely until the foam is gone and the timbers are documented as sound.
We remove the foam, inspect every rafter and provide a dated photo record and removal certificate. This is the pack lenders and valuers ask for, and it usually unblocks a stalled sale within two to three weeks.
Loft condensation and musty smells
Trapped moisture soaks into rafters and insulation, causing mould, damp patches on ceilings and a smell that spreads through upstairs rooms.
We extract the foam, clear every cavity and restore airflow through the roof deck. Most lofts dry out within two to three weeks, and we treat any early surface mould before we finish.
Roof timber rot from trapped damp
Rafters and battens soften from the inside, which weakens the roof structure and can lead to expensive repairs if it is left another season.
Our technicians check every timber with a moisture meter and thermal imaging camera during removal. Early rot is treated on site, and anything structural is flagged with photographs so you can get it fixed before it spreads.
Rising energy bills and cold rooms
Shrunk foam leaves gaps and cold bridges, so heat escapes through the roof and your heating runs longer than it should every winter.
Once the foam is out we fit breathable loft insulation to current standards, usually achieving a U-value of 0.16 W/m2K or better. Homeowners typically notice warmer upstairs rooms within the first cold snap.
When Telford homeowners need spray foam removal
A Telford buyer has had an offer accepted but the lender's valuer flags spray foam on the roof deck.
We survey within 48 hours, remove the foam, document the timber condition and issue a mortgage-ready report. We can usually start work within one to two weeks of instruction.
The lender gets the evidence it needs, and the purchase completes without further delay.
A Wellington homeowner notices damp patches on upstairs ceilings and a musty smell in the loft.
We identify whether the foam is trapping moisture, extract it, clear the cavities and treat any early mould. A thermal imaging camera confirms the timbers are drying out.
The loft dries within two to three weeks and the damp smell clears from the upstairs rooms.
A landlord in Dawley needs two rental lofts cleared between tenancies to keep the properties mortgageable.
We schedule both jobs back to back, seal each loft and work around the changeover dates. Waste is removed and documented for the landlord's records.
Both properties are clear, documented and ready for new breathable insulation before the next tenants move in.
A homeowner in Stirchley wants to use the loft for storage but the foam has shrunk and the space is cold and draughty.
We remove the foam, clear residue with dry ice blasting and re-insulate to current standards. The loft hatch is restored and the space is left clean.
A dry, warm loft that can be used for storage and no longer drags heat out of the house.
Tools and methods we use
Tools & Equipment
Spray foam removal saw
Cuts through thick closed cell foam in straight, controlled lines so we can lift it off rafters without damaging the timber underneath.
Oscillating multi-tool
Gets into corners, around cables and behind battens where a full saw will not fit. Essential for a clean finish in older Telford lofts.
Dry ice blasting machine
Fires dry ice pellets at residue to freeze and lift it off brick, mortar and timber without chemicals, water or surface damage.
Sand blasting equipment
Used with controlled sand blasting media on stubborn foam and blockwork where a faster, more aggressive clean is needed.
Industrial vacuum
Runs throughout the job under negative air pressure to capture dust and foam particles before they reach your living space.
Thermal imaging camera
Finds hidden moisture pockets and cold bridges behind rafters, so we know exactly where to check and what to document.
Respirator and protective clothing
Worn by every technician on site. Spray foam dust and isocyanate residue are not something you want to breathe in.
Methods
Dry ice blasting
Dry ice pellets freeze the foam residue and lift it off the surface without water or chemicals. It is our preferred method for brick, mortar and delicate timber, and it leaves no secondary waste beyond the foam itself.
Sand blasting
For heavy closed cell foam on blockwork, controlled sand blasting strips the surface quickly. We contain the dust fully with sheeting and negative air pressure so nothing escapes into the rest of the house.
Mechanical cutting
Saws and oscillating multi-tools do the bulk of the work, cutting foam into manageable sections that can be bagged and carried out. This is the fastest and cleanest way to remove thick foam from rafters.
Thermal survey and moisture mapping
Before and after removal we map moisture with a thermal imaging camera and moisture meter. This tells us whether the roof deck is drying correctly and gives you a documented baseline for the future.
How Attic spray foam removal works in Telford
Telford has a mixed housing stock, and that shapes how we work. Victorian and Edwardian terraces around Wellington and Oakengates often have shallow lofts with tight rafter spacing, so we rely on oscillating multi-tools and dry ice blasting rather than large saws. The 1960s and 1970s estates in Dawley, Madeley and Sutton Hill usually have deeper lofts and thicker closed cell foam, which takes longer to cut back. Shropshire's damp climate matters too: lofts here hold moisture through autumn and winter, so trapped foam causes problems faster than in drier parts of the country. We check every timber with a moisture meter and thermal imaging camera, and we schedule removals so the loft has the best chance to dry out before re-insulation. If you need spray foam removal from attic Telford wide, we cover the whole town and surrounding villages.
Service Areas
Older terraces with shallow lofts and tight rafters. We use multi-tools and dry ice blasting here rather than large saws, and access is often through a small landing hatch.
1960s and 1970s semis with deeper lofts and heavy closed cell foam. These jobs usually take two to three days and often need re-insulation on the same visit.
A mix of older and newer homes where foam has often shrunk away from the rafters. Thermal imaging is useful here to find cold bridges and hidden moisture.
Modern timber-frame properties where foam was applied to a breathable membrane. We work carefully to avoid damaging the membrane during extraction.
Larger detached homes with wide roof spans. These need more waste bags, more disposal and often a second day on site to clear every bay properly.
Local Considerations
Damp Shropshire winters
Lofts hold moisture from October through March, so trapped foam causes condensation and timber damp faster than in drier regions. We schedule removals to allow the roof deck to dry before re-insulation.
Mixed-age housing stock
Telford has Victorian terraces, 1970s semis and modern timber-frame homes within a few streets. Each needs a different extraction method and a different approach to re-insulation.
Tight loft access in older homes
Small hatches and low roof pitches slow the work down. We plan access on the survey and use compact equipment where a full-size saw will not fit.
Mortgage-driven deadlines
Many Telford removals are tied to a sale or purchase. We prioritise these jobs and provide the documentation lenders need as soon as the work is finished.
Mortgage refused, sale rescued in Wellington
A three-bed terrace in Wellington had closed cell foam across the entire roof deck. The buyer's lender refused to lend, and the sale had stalled for six weeks with no clear route forward.
We removed the foam over three days, treated two rafters with early surface mould and issued a photo report and removal certificate. The lender accepted the evidence and the sale completed two weeks later.
Maintenance & Follow-up
We fitted breathable insulation to a U-value of 0.16 W/m2K and advised the new owner to check the loft once a year for any signs of damp.
A 1970s semi in Dawley had foam that had shrunk away from the rafters, leaving cold bridges and a musty smell that spread into the upstairs bedrooms. Damp patches had started to show on the landing ceiling.
We extracted the foam, cleared every cavity and treated the mould. Loft humidity dropped back to normal within three weeks, and the damp patches on the landing dried out completely without any ceiling repairs.
Maintenance & Follow-up
New breathable insulation was fitted and we recommended keeping the loft hatch slightly ventilated in winter to help airflow.
A homeowner in Stirchley wanted to use the loft for storage, but the foam had shrunk and the space was cold, draughty and unpleasant to be in. Energy bills had crept up over two winters.
We removed the foam with dry ice blasting to protect the timber, cleared the residue and re-insulated to current standards. The loft is now dry, warm and usable, and the homeowner reported noticeably warmer upstairs rooms the following winter.
Maintenance & Follow-up
We advised an annual visual check of the insulation and a quick moisture check after any severe storm.
How much does attic spray foam removal cost in Telford?
Most Telford lofts cost between 1,800 and 4,500 pounds to clear in 2026, depending on foam thickness, roof size and access. A typical three-bed semi with 60 square metres of closed cell foam sits around 2,400 to 3,200 pounds. That covers extraction, disposal, timber inspection and a photo report. Re-insulation is quoted separately if you want it.
Can you remove spray foam from my attic in Telford Shropshire?
Yes. We remove open cell and closed cell spray foam from lofts across Telford and the wider Shropshire area, including Wellington, Madeley, Dawley and Oakengates. We survey first, confirm the foam type, then cut it back with specialist saws and clear residue with dry ice blasting or sand blasting equipment. Most lofts are cleared in one to three days.
Is attic spray foam removal necessary for a mortgage in Telford?
In most cases, yes. The majority of UK lenders will not lend against a property with spray foam on the roof deck because it traps moisture and can hide timber rot. Removal, plus a clean report and breathable replacement insulation, is usually the fastest route to satisfying a valuer. We provide the documentation lenders ask for.
How long does attic spray foam removal take in Telford?
A standard Telford loft takes one to three working days. Small lofts with thin open cell foam can be done in a single day, while larger roofs with thick closed cell foam and heavy residue may run to four days. We confirm the schedule after the survey and keep to it, so you can plan around the work.
Accredited and reviewed in Telford
Certifications
Reviews
Removed spray foam from our loft in Wellington after the lender refused the mortgage. Survey within two days, work done in three, and the report was accepted straight away. Clean, professional and no mess left behind.
We had damp and a musty smell in the loft for two winters. They found the problem, removed the foam and treated the mould. The smell is gone and the upstairs rooms feel warmer. Fair price for the amount of work involved.
Two rental properties in Dawley cleared between tenancies. Both jobs done on schedule, waste removed properly and the paperwork was spot on. Would use again for any other properties we buy.
Used dry ice blasting to clear residue without damaging our old rafters. The loft is dry and finally usable for storage. Explained everything clearly and kept to the quoted price.
Related Services
Spray Foam Removal near me
If you need spray foam removal near me in Telford, we cover the whole town and surrounding villages. Same team, same equipment, whether it is a loft, a roof deck or a cavity. We survey first and quote a fixed price.
Spray Foam Removal near mesame day Spray Foam Removal
For urgent mortgage deadlines or a quick sale, we offer same day spray foam removal where the survey allows. Call before 10am and we can often be on site the same afternoon to start extraction on smaller Telford lofts.
same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line is for emergencies such as a collapsed loft section or water ingress after foam failure. We answer calls around the clock and arrange the earliest safe visit, usually within 24 hours across Telford.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Residential spray foam removal covers houses, bungalows and flats across Telford. We work around your family, seal the loft, and keep dust out of living areas. Most homes are back to normal the same evening after each day on site.
Residential Spray Foam RemovalCommercial Spray Foam Removal
Commercial spray foam removal for Telford warehouses, workshops and retail units. We work outside trading hours where needed, handle larger roof areas and provide the waste transfer documentation your facilities team will ask for.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal is our core service. We cut foam off rafters and roof decks, clear residue and leave the loft ready for breathable insulation. This is the job most Telford homeowners need before a mortgage valuation.
loft spray foam removalroof spray foam removal
Roof spray foam removal deals with foam applied directly to the underside of tiles and felt. It is slower work because access is tight, but we use specialist saws and blasting equipment to clear it without damaging the roof covering.
roof spray foam removalspray foam insulation removal
Spray foam insulation removal covers all foam types, from thin open cell layers to thick closed cell polyurethane. We identify the product, remove it safely and dispose of it through licensed carriers, with a full photo record for your records.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam removal is usually quicker because the foam is softer and less bonded. We still seal the loft and vacuum thoroughly, and we check for moisture underneath, which is common in older Telford properties.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam removal is the harder job. This foam sets rock hard and bonds to timber, so we rely on spray foam removal saws, oscillating multi-tools and dry ice blasting to lift it without gouging rafters.
closed cell spray foam removalmortgage lender spray foam removal
Mortgage lender spray foam removal is tailored to satisfy valuers. We remove the foam, document timber condition and provide a certificate and photographs that lenders accept. This is the service most Telford buyers and sellers need.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers spray foam, old mineral wool and contaminated loft insulation. If your loft has a mix of materials, we clear it all in one visit and leave the space clean and ready for new insulation.
insulation removal serviceinsulation assessment
An insulation assessment tells you what is in your loft, whether it is causing damp and what it will cost to remove. We use a thermal imaging camera and moisture meter, then give you a written report with photographs.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting spray foam removal uses dry ice pellets to freeze and lift residue without chemicals or water. It is ideal for brick, mortar and delicate timber where sand blasting would be too aggressive.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal deals with foam injected into wall cavities, which can cause damp and mortgage issues. We assess the cavity, remove what we can and advise on the best route to a dry, breathable wall.
Cavity wall spray foam removalsand blasting spray foam insulation removal
Sand blasting spray foam insulation removal uses controlled sand blasting media to strip stubborn foam from brick and block. It is fast and thorough, and we contain the dust fully so nothing escapes into your home.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat and thermal imaging to soften foam and find hidden pockets behind rafters. It is useful where foam has been applied unevenly or where previous removal attempts left residue.
thermal spray foam removalenvironmentally friendly insulation removal
Environmentally friendly insulation removal means we bag, label and recycle or responsibly dispose of every bit of foam we take out. No fly-tipping, no burning, and full waste transfer notes for your records.
environmentally friendly insulation removalWarehouse spray Foam removal
Warehouse spray foam removal covers large industrial roofs in Telford and Shropshire. We work in phases, often at night or at weekends, so your operation keeps running while we clear the foam and document the roof condition.
Warehouse spray Foam removalBook your Attic spray foam removal in Telford today
We are a local, accredited team with hundreds of Shropshire lofts cleared since 2022. Call us for a free survey, a fixed price and a mortgage-ready report. Most Telford surveys are booked within 48 hours.