Roof spray foam removal in Telford done right, first time
Specialist extraction that clears your roof and satisfies mortgage lenders
If spray foam insulation is trapping moisture in your roof, causing condensation or blocking a mortgage, our roof spray foam removal in Telford solves it. We extract open and closed cell foam from rafters, tiles and loft spaces across Shropshire, using dry ice blasting and industrial vacuums. Most jobs finish in one to three days, and we leave the timber clean, dry and ready for a surveyor. Call us for a free assessment.
What roof spray foam removal in Telford actually involves
Roof spray foam removal in Telford is the controlled extraction of polyurethane foam from the underside of your roof, rafters and loft deck. The foam was often applied years ago to boost insulation, but if it was mixed wrong or sprayed onto damp timber it traps condensation, rots rafters and blocks mortgage valuations. We cut the foam back with an oscillating multi-tool and spray foam removal saw, then blast the residue off with dry ice pellets or sand blasting media. A thermal imaging camera confirms every rafter is clean before we finish.
Telford homeowners call us for three main reasons: a lender has refused a mortgage because of spray foam insulation damage, loft condensation is dripping onto stored belongings, or energy bills have climbed because the foam has shrunk and left gaps. In Shropshire's older housing stock, especially around Wellington and Dawley, foam was often sprayed directly onto breathable felt, which stops the roof from drying out. We remove it without damaging the tiles, then advise on loft insulation that actually works.
Why Telford homeowners choose our foam extraction
Removing spray foam is not a DIY job. It needs the right tools, safe handling of isocyanate dust, and a finish that satisfies surveyors. Here is what you get when you book our team.
Mortgage-ready clean finish
Lenders and surveyors want to see bare, dry timber. We remove every trace of foam from rafters and roof deck, then provide a written report with photos. That paperwork has helped clients in Telford Town Centre and Oakengates get their mortgage offer back within days of our visit.
Stop condensation and rot
Spray foam shrinkage leaves gaps where warm air meets cold felt, and that is where loft condensation starts. We extract the foam, dry the timbers, and check ventilation paths. One Leegomery customer had 4 litres of water a week dripping into the loft; after removal, the drips stopped completely.
Safe, controlled extraction
Polyurethane foam dust contains isocyanate and polyol residues that irritate lungs. Our technicians wear respirators and protective clothing, and we run industrial vacuums with HEPA filters at the extraction point. Dry ice blasting freezes residue so it lifts off without chemicals, which is safer for your family and the environment.
Lower energy bills afterwards
Once the failed foam is gone, we can fit modern loft insulation that performs properly. Kingspan and Rockwool boards or Thermafleece natural rolls sit between rafters without trapping moisture. Clients in Stirchley and Donnington have seen their heating costs drop by 15-20% after we replaced old foam with breathable insulation.
Our roof spray foam removal process
Every job follows the same five steps, whether it is a small loft in Madeley or a full roof in Hadley. You get a clear timeline, a fixed price, and a clean site at the end.
Free assessment
We visit your property, inspect the roof space with a thermal imaging camera, and test the foam type. You get a written quote the same day, usually within 2 hours of the visit. We also check for roof timber rot and cavity wall damp while we are there.
Site protection
Before we start, we lay dust sheets across the loft and seal the hatch. We set up industrial vacuums and negative air pressure so no foam dust enters your home. This takes about 30 minutes on a typical Telford semi-detached house.
Foam extraction
Our technicians cut the bulk of the foam with an oscillating multi-tool and spray foam removal saw, then blast the residue with dry ice pellets or sand blasting media. We work rafter by rafter, checking each one with a thermal imaging camera before moving on. A standard 3-bedroom roof takes 1-2 days.
Timber inspection
With the foam gone, we inspect every rafter for rot, shrinkage cracks and previous water damage. If we find soft timber, we treat or replace it before closing up. You get a full photo report showing the condition of your roof structure.
Clean-up and handover
We vacuum the entire loft, remove all debris, and dispose of the foam at a licensed waste facility. Before we leave, we walk you through the finished job and hand over your mortgage-ready report. The whole process is usually complete within 3 days.
Specialist spray foam removal expertise
AeroSpace Spray Foam Team has been removing spray foam since 2022, completing over 300 roof extractions across Shropshire. Our technicians hold NVQ in insulation removal and CITB certification, and we are CHAS accredited and Constructionline registered. We have worked with mortgage lenders, surveyors and homeowners to resolve spray foam insulation damage on every roof type, from Victorian slate in Wellington to modern trussed rafters in Lightmoor. We do not subcontract; the same team that quotes your job carries it out.
- Over 300 spray foam removals completed across Telford and Shropshire since 2022.
- NVQ in insulation removal and CITB certification held by every technician on our team.
- CHAS accreditation and Constructionline registration verified for domestic and commercial work.
- Thermal imaging camera used on every job to confirm no foam residue remains.
- Approved by local mortgage lenders as a specialist contractor for spray foam extraction.
Why our roof spray foam removal in Telford stands out
We are not a general builder who occasionally removes foam. This is what we do every day, and it shows in the finish, the paperwork and the way we treat your home.
Mortgage lender approved
We provide the photo report and written confirmation that surveyors need to release a mortgage. Our reports have been accepted by major UK lenders, including cases in Telford Town Centre where a sale was days from collapsing. You get the paperwork within 24 hours of completion.
Dry ice blasting specialists
Dry ice blasting removes foam residue without water or chemicals, so your timbers stay dry and rot does not set in. We invested in a dedicated dry ice blasting machine because it is the fastest, cleanest method for rafter spray foam removal Telford homeowners need. No other local firm offers this as standard.
Fixed pricing, no surprises
You get a fixed price after the free assessment, and that is what you pay. No hidden extras for waste disposal, protective sheeting or the final report. For a typical 3-bedroom semi in Wellington, roof insulation removal Telford Shropshire costs between £1,800 and £3,200 depending on foam thickness and access.
Local team, local knowledge
We live and work in Shropshire, so we know the building stock. Telford's 1960s-70s estates often have foam sprayed onto bitumen felt, while older cottages in Dawley have breathable felt that needs a gentler approach. We adjust our extraction method to suit your roof, not the other way around.
What our roof spray foam removal includes
Our standard roof spray foam removal package covers everything from the first inspection to the final report. We do not charge extra for waste disposal, protective sheeting or the mortgage paperwork. Here is exactly what you get when you book us.
Free thermal imaging survey
We inspect your roof space with a thermal imaging camera to map the foam and spot hidden condensation. You get a written assessment and fixed quote, usually within 2 hours of our visit. This survey also checks for roof timber rot and cavity wall damp.
Full foam extraction
We remove all spray foam from rafters, roof deck and loft floor using an oscillating multi-tool, spray foam removal saw and dry ice blasting. Every rafter is checked with a thermal camera before we move on. We take the foam away and dispose of it at a licensed facility.
Timber treatment and repair
If we find rot or shrinkage cracks in your rafters, we treat or replace the affected timber. This is included in our fixed price for most jobs. We use treated timber that matches your existing roof structure and meets current building regulations.
Mortgage-ready photo report
You receive a detailed report with before-and-after photos, confirmation that timbers are clean and dry, and a statement that the roof is free from spray foam. Lenders and surveyors accept this report as evidence that the issue is resolved. We send it within 24 hours of completion.
Full clean-up and waste removal
We vacuum the entire loft, wipe down surfaces and remove all debris. Dust sheets protect your home during the work, and we use negative air pressure to keep foam dust out of living areas. You are left with a clean, empty loft ready for new insulation.
Problems we solve with roof spray foam removal in Telford
Spray foam that was installed incorrectly causes a chain of problems. We break that chain by removing the foam and restoring your roof to a healthy, breathable state.
Mortgage refusal due to spray foam
Lenders see spray foam as a risk because it can hide rot and trap moisture. A refused mortgage can delay or cancel your sale, leaving you stuck with a property you cannot sell or remortgage.
We remove the foam, inspect the timbers and provide a report that satisfies lenders. Our clients in Telford Town Centre and Oakengates have had mortgage offers reinstated within days of our report reaching the surveyor.
Loft condensation and dripping water
Foam shrinkage leaves gaps where warm air meets cold roof felt. Condensation forms, drips onto stored items and can soak insulation, leading to mould and further timber damage.
We extract the foam and check ventilation paths. Once the roof can breathe again, condensation stops. One Leegomery customer collected 4 litres of water a week before we removed the foam; afterwards, the loft stayed completely dry.
Roof timber rot from trapped moisture
Foam traps moisture against rafters, causing rot that weakens the roof structure. If left, rot spreads and can require expensive structural repairs or even a new roof.
We remove the foam, then inspect every rafter for rot. Affected timber is treated or replaced as part of the job. We use treated timber and provide a photo record so you can see the repair was done properly.
Rising energy bills from failed insulation
When spray foam shrinks, it leaves gaps that let heat escape. Your boiler works harder and your energy bills climb, even though you paid for insulation that should have reduced them.
After removing the foam, we can install modern loft insulation such as Kingspan boards or Thermafleece rolls. These perform better and do not trap moisture. Clients in Stirchley and Donnington have seen heating costs drop by 15-20%.
When you need roof spray foam removal
Your mortgage lender has flagged spray foam during a valuation and you need it removed before the sale completes.
We prioritise mortgage-related jobs and can often start within 48 hours. Our team removes the foam, inspects the timbers and sends a report directly to your lender or solicitor. We have helped buyers in Wellington and Hadley complete on time.
Your lender releases the mortgage, and you complete the sale without further delay. The report also gives you peace of mind that the roof is sound.
You have noticed damp patches or dripping water in your loft, and the spray foam looks shrunken or discoloured.
We carry out a thermal imaging survey to confirm the foam is trapping moisture. Then we remove it using dry ice blasting, check for rot and improve ventilation. Most jobs are finished in 1-2 days.
The condensation stops, your loft dries out and stored items are no longer at risk. You also avoid the cost of replacing rotten rafters later.
You are selling your home and the buyer's surveyor has reported spray foam as a defect that needs specialist removal.
We provide a fast turnaround for house sales, including a written report and photo evidence that the foam has been fully removed. We can work around your buyer's timetable and coordinate access with your estate agent.
The buyer's surveyor signs off the roof, and your sale proceeds. You avoid renegotiation or a price reduction caused by the foam.
Your energy bills have risen sharply, and you suspect the spray foam in your roof has failed and is no longer insulating properly.
We remove the failed foam and advise on replacement insulation that suits your roof type. For Telford's older properties, we often recommend breathable options like Thermafleece. We can fit new insulation during the same visit.
Your roof insulates properly again, and your heating costs fall. You also get a healthier loft environment with no trapped moisture.
Tools and methods we use for foam removal
Tools & Equipment
Dry ice blasting machine
Freezes foam residue so it lifts off rafters without water or chemicals. Ideal for closed cell foam and delicate felt. Leaves timber dry and ready for inspection.
Oscillating multi-tool
Cuts through thick foam in tight corners where a saw cannot reach. We use it to slice foam away from rafters, pipes and chimney breasts without damaging the timber.
Spray foam removal saw
A long-bladed saw designed specifically for cutting polyurethane foam. It speeds up bulk removal on large roof areas, reducing job time by up to 30%.
Thermal imaging camera
Detects hidden moisture and confirms every rafter is free from foam residue. We use it before, during and after extraction to prove the job is complete.
Industrial vacuum with HEPA filter
Captures foam dust and isocyanate particles at the source. Prevents contamination of your living space and protects our technicians from respiratory harm.
Respirator and protective clothing
Every technician wears a fitted respirator, coveralls and gloves. Spray foam dust contains isocyanate and polyol, which irritate lungs and skin.
Methods
Dry ice blasting
We accelerate dry ice pellets at the foam, causing it to freeze and crack off the surface. No water or chemicals are used, so timbers stay dry and no secondary waste is created. This is our preferred method for roof spray foam removal Telford wide.
Sand blasting media
For stubborn closed cell foam, we use fine sand blasting media to abrade the residue. We contain the media with sheeting and vacuums, so no dust escapes. This method is effective on brick, stone and timber surfaces.
Manual scraping and chiselling
In areas where power tools risk damage, we use hand scrapers and chisels. This is slower but necessary around delicate felt, lead flashing and historic timbers. Our technicians are trained to judge which method suits each surface.
Thermal imaging verification
After extraction, we scan every rafter with a thermal imaging camera. Any remaining foam shows up as a cold spot. We do not finish until the scan is clear, and we include the images in your report.
How roof spray foam removal works in Telford
Telford's housing stock ranges from Victorian terraces in Wellington to 1960s-70s estates in Dawley and Stirchley. Many of these homes had spray foam applied in the 2000s under government insulation schemes. In Shropshire's damp climate, foam sprayed onto bitumen felt traps moisture and causes condensation. We adapt our extraction method to suit the roof: gentler dry ice blasting for older felt, faster saw cutting for modern trussed rafters. We also check cavity wall insulation, because the same installers often did both. If you need roof spray foam removal in Telford Shropshire, we know the local building quirks and the surveyors who inspect them. We work with lenders across the county and can provide the reports they require.
Service Areas
Many Victorian terraces here have breathable felt that foam blocks. We use low-pressure dry ice blasting to avoid damaging the felt, then check the loft for condensation.
1960s estates in Dawley often have foam sprayed directly onto bitumen felt. This traps moisture and causes rot. We remove it and improve ventilation to stop the problem returning.
Newer apartments and townhouses here sometimes have closed cell foam in roof voids. We use saw cutting and sand blasting to clear it quickly without disturbing neighbours.
Modern trussed rafter roofs in Lightmoor are easier to access, but foam can still shrink and leave gaps. We extract it and check the insulation meets current building regulations.
Local Considerations
High humidity in Shropshire winters
Damp air meets cold roof felt and condenses inside the foam. This accelerates rot and makes extraction more urgent. We check ventilation and advise on breathable insulation.
Older roofs with bitumen felt
Bitumen felt is fragile and can tear if blasted too hard. We use low-pressure dry ice or manual scraping to protect the felt while still removing all foam.
Foam installed over cavity wall insulation
When the same installer did both, foam can bridge the damp-proof course. We inspect the cavity and remove foam there too if needed, preventing rising damp.
Mortgage rescue in Telford Town Centre
A homeowner's sale was about to collapse because the surveyor found spray foam in the roof. The lender refused to release funds until it was removed and a report provided. The foam was 60mm closed cell, sprayed onto bitumen felt.
We removed all foam in two days using dry ice blasting and saw cutting. The timbers were clean and dry, and we provided a photo report within 24 hours. The lender released the mortgage, and the sale completed on schedule.
Maintenance & Follow-up
We advised the new owner to check the loft annually for condensation and ensure vents remain clear. No further foam removal is needed.
A family had 4 litres of water a week dripping from their loft into stored boxes. The spray foam had shrunk, leaving gaps where warm air met cold felt. Mould was starting on the rafters.
We extracted the foam in one day and treated the mould with a fungicidal wash. We improved ventilation by clearing blocked soffit vents. The dripping stopped immediately, and the loft has stayed dry through two winters.
Maintenance & Follow-up
They now run a dehumidifier in the loft during winter and check vents each autumn. The rafters remain dry and mould-free.
A retired couple's energy bills had risen by 20% over three years. Their spray foam had shrunk and was no longer insulating. They also had cavity wall foam that was causing damp patches on internal walls.
We removed roof foam and cavity wall foam in three days. Then we installed Kingspan loft insulation between the rafters. Their next quarterly bill was 18% lower, and the damp patches disappeared.
Maintenance & Follow-up
We recommended an annual insulation check and keeping the loft hatch sealed. The new insulation should last 25 years or more.
How much does roof spray foam removal cost in Telford?
Most Telford homeowners pay between £1,800 and £3,500 for roof spray foam removal in 2026, depending on roof size, foam thickness and access. A standard 3-bedroom semi with 50mm closed cell foam typically costs £2,200 to £2,800. That includes extraction, waste disposal, timber inspection and your mortgage report. We provide a fixed quote after a free assessment, so you know the exact cost before we start.
Can you remove spray foam from my roof in Telford Shropshire?
Yes, we remove all types of spray foam from roofs across Telford and Shropshire, including open cell, closed cell and polyurethane foam. We use dry ice blasting and sand blasting to clear residue from rafters, tiles and felt without damaging the structure. If your foam was applied by a previous owner or a national installer, we can still extract it. Call us on 0195 230 1076 to book a free assessment.
Is roof spray foam removal covered by insurance in Telford?
In most cases, no. Standard home insurance does not cover spray foam removal because it is classed as a maintenance issue, not a sudden event. However, if the foam was installed by a registered installer who breached regulations, you may have a claim against them. We provide a detailed report you can submit to your insurer or solicitor. Some Telford clients have recovered costs through mis-selling claims.
How long does roof spray foam removal take in Telford?
A typical 3-bedroom semi-detached roof in Telford takes 1 to 2 days to clear, with the full process including inspection and clean-up finishing within 3 days. Larger detached houses or roofs with thick closed cell foam can take 3 to 4 days. We work in sections so your home stays weatherproof throughout. You will have a clear timeline before we start, and we stick to it.
Trusted and certified in Shropshire
Certifications
Reviews
AeroSpace removed spray foam from our roof after a mortgage refusal. They were professional, tidy and provided the report quickly. The surveyor passed the roof without issue. Highly recommend for anyone in Telford.
We had condensation dripping into the loft for months. The team removed the foam and fixed the ventilation in two days. No more drips, and they left the loft spotless. Fair price too.
Excellent service from start to finish. They explained the process clearly, protected our home and finished on time. The photo report was detailed and helped with our remortgage. Would use again.
Related services we offer
Spray Foam Removal near me
If you need spray foam removal near me in Telford, we cover every neighbourhood from Wellington to Hollinswood. Our local team responds within 24 hours for assessments and can often start work the same week. We remove foam from lofts, roofs and cavity walls.
Spray Foam Removal near mesame day Spray Foam Removal
For urgent cases, we offer same day spray foam removal across Telford. If a surveyor is due or you have a leak, call before 10am and we can often be on site that afternoon. We carry dry ice blasting equipment and protective sheeting on every van.
same day Spray Foam Removal24/7 Spray Foam Removal
Our 24/7 spray foam removal line is for emergencies like active leaks or storm damage where foam is trapping water. Call 0195 230 1076 any time and we will arrange an emergency visit. We cover all Telford postcodes and surrounding Shropshire villages.
24/7 Spray Foam RemovalResidential Spray Foam Removal
Residential spray foam removal is our core service. We work in occupied homes with dust sheets and negative air pressure to keep mess contained. From bungalows in Madeley to townhouses in Telford Town Centre, we remove foam and leave your loft clean and mortgage-ready.
Residential Spray Foam RemovalCommercial Spray Foam Removal
We handle commercial spray foam removal for warehouses, offices and retail units across Shropshire. Our team works out of hours to avoid disrupting your business. We provide RAMS and insurance certificates before starting, and we dispose of all foam at licensed facilities.
Commercial Spray Foam Removalloft spray foam removal
Loft spray foam removal focuses on the insulation between and under your roof rafters. We extract foam from the loft floor and roof deck, then check ventilation. This is the most common job we do in Telford, especially in 1960s-70s estates where foam was sprayed onto felt.
loft spray foam removalAttic spray foam removal
Attic spray foam removal is the same process as loft removal but often involves tighter access and older timber. We use compact oscillating multi-tools and smaller dry ice nozzles to reach awkward corners. Many Telford attics have foam behind water tanks and chimney breasts.
Attic spray foam removalspray foam insulation removal
Spray foam insulation removal covers all foam types, including open cell and closed cell. We test the foam first to identify its composition, then choose the safest extraction method. If the foam contains isocyanate, we use respirators and HEPA vacuums to protect your home.
spray foam insulation removalopen cell spray foam removal
Open cell spray foam is softer and easier to remove than closed cell, but it still traps moisture if applied incorrectly. We cut it back with a spray foam removal saw and vacuum the dust. Most open cell jobs in Telford take one day for a standard semi.
open cell spray foam removalclosed cell spray foam removal
Closed cell spray foam is dense and rigid, often used in roofs for its high insulation value. It is harder to remove and requires dry ice blasting or sand blasting to clear residue. We allow 2 to 3 days for a typical closed cell roof in Telford.
closed cell spray foam removalmortgage lender spray foam removal
If your mortgage lender has flagged spray foam, we provide the specialist removal and report they need. We have worked with surveyors across Shropshire to resolve mortgage refusal due to spray foam. Our report includes before-and-after photos and confirmation that timbers are clean.
mortgage lender spray foam removalinsulation removal service
Our insulation removal service covers spray foam, old mineral wool and contaminated loft insulation. If your loft insulation is damp or compressed, we remove it and dispose of it responsibly. We can then install new insulation that meets current building regulations.
insulation removal serviceinsulation assessment
An insulation assessment tells you whether your spray foam is causing problems or is safe to leave. We use a thermal imaging camera to check for condensation and heat loss. In Telford, assessments often reveal foam shrinkage that has opened gaps in the insulation layer.
insulation assessmentdry ice blasting spray foam removal
Dry ice blasting is our preferred method for clearing foam residue from rafters. It freezes the foam so it lifts off without water or chemicals, leaving timber dry and ready for inspection. We use this on every roof spray foam removal Telford job where access allows.
dry ice blasting spray foam removalCavity wall spray foam removal
Cavity wall spray foam removal is often needed alongside roof extraction, especially if the same installer did both. Foam in cavity walls can bridge the damp-proof course and cause rising damp. We extract it using specialised rods and vacuums, then check the wall for damage.
Cavity wall spray foam removalsand blasting spray foam insulation removal
Sand blasting spray foam insulation removal uses fine media to strip foam from brick, stone and timber. It is effective on stubborn closed cell foam that dry ice cannot shift. We contain the media with sheeting and vacuums, so no dust escapes into your home.
sand blasting spray foam insulation removalthermal spray foam removal
Thermal spray foam removal uses heat to soften the foam before scraping. It is useful for thin layers or foam that has bonded to delicate surfaces. We use it sparingly because heat can damage felt, but it is a valuable option for older Telford roofs.
thermal spray foam removalenvironmentally friendly insulation removal
Our environmentally friendly insulation removal avoids harsh chemicals. Dry ice blasting produces no secondary waste, and we recycle or dispose of foam at licensed facilities. For Telford clients who want a greener approach, we can also advise on natural insulation like Thermafleece.
environmentally friendly insulation removalWarehouse spray Foam removal
Warehouse spray foam removal is a large-scale job we handle for commercial clients across Shropshire. We work in bays to keep your operation running, often at night or weekends. Our team is equipped with industrial vacuums and scissor lifts for high ceilings.
Warehouse spray Foam removalBook your roof spray foam removal in Telford today
Do not let spray foam block your mortgage or rot your rafters. Call AeroSpace Spray Foam Team on 0195 230 1076 for a free assessment. We are CHAS accredited and have completed over 300 removals across Shropshire. Same-day quotes available.